Manual:Mapper Functions

Mapper Functions

These are functions that are to be used with the Mudlet Mapper. The mapper is designed to be MUD-generic - it only provides the display and pathway calculations, to be used in Lua scripts that are tailored to the MUD you're playing. For a collection of pre-made scripts and general mapper talk, visit the mapper section of the forums.

To register a script as a mapping one with Mudlet (so Mudlet knows the profile has one and won't bother the user when they open the map), please do this in your script: <lua> mudlet = mudlet or {}; mudlet.mapper_script = true </lua>

addAreaName

areaID = addAreaName(areaName)

Adds a new area name and returns the new area ID for the new name. If the name already exists, -1 is returned.

addCustomLine

addCustomLine(roomID, id_to, direction, style, color, arrow): See also: getCustomLines()

Adds a new/replaces an existing custom exit line to the 2D mapper for the room with the Id given. Introduced in version 2.1 of Mudlet.

Parameters

roomID:

Room ID to attach the custom line to.

id_to:

EITHER: a room Id number, of a room on same area who's x and y coordinates are used as the other end of a SINGLE segment custom line (it does NOT imply that is what the exit it represent goes to, just the location of the end of the line);

OR: a table of sets of THREE (x,y and z) coordinates in that order, x and y can be decimals, z is an integer (and must be present and be the same for all points on the line, though it is irrelevant to what is produced as the line is drawn on the same z-coordinate as the room that the line is attached to!)

direction: a string to associate the line with a valid exit direction which to work properly must be an UPPERCASE string for the Normal exits, one of: "N", "NE", "E", "SE", "S", "SW", "W", "NW", "UP", "DOWN", "IN" or "OUT" or cased to match a Special exit - though if there is a clash the effects may not be what is expected {e.g. do not have a special exit called "OUT"}! Also note that this set of normal exit "keys" are not the same as those used for exit weights, doors or locks...!
style: a string, one of: "solid line", "dot line", "dash line", "dash dot line" or "dash dot dot line" exactly.
color: a table of three integers between 0 and 255 as the custom line color as the red, green and blue components in that order.
arrow: a boolean which if true will set the custom line to have an arrow on the end of the last segment.

Examples

<lua> addCustomLine(1, 2, "N", "dot line", {0, 255, 255}, true)

addCustomLine(1, {{4.5, 5.5, 3}, {4.5, 9.5, 3}, {6.0, 9.5, 3}}, "climb Rope", "dash dot dot line", {128, 128, 0}, false) </lua>

Note: At the time of writing there is no Lua command to remove a custom exit line and, for Normal exits in the X-Y plane, revert to the standard straight line between the start room and the end room (or colored arrow for out of area exits) however this can be done from the GUI interface to the 2D mapper.

addMapEvent

addMapEvent(uniquename, event name, parent, display name, arguments)

Adds a new entry to an existing mapper right-click entry. You can add one with addMapMenu. If there is no display name, it will default to the unique name (which otherwise isn't shown and is just used to differentiate this entry from others). event name is the Mudlet event that will be called when this is clicked on, and arguments will be passed to the handler function.

Example

<lua> addMapEvent("room a", "onFavorite") -- will make a label "room a" on the map menu's right click that calls onFavorite

addMapEvent("room b", "onFavorite", "Favorites", "Special Room!", 12345, "arg1", "arg2", "argn") </lua> The last line will make a label "Special Room!" under the "Favorites" menu that on clicking will send all the arguments.

addMapMenu

addMapEvent(uniquename, parent, display name)

Adds a new submenu to the right-click menu that opens when you right-click on the mapper. You can then add more submenus to it, or add entries with addMapEvent().

Example

<lua> addMapMenu("Favorites") -- will create a menu, favorites

addMapMenu("Favorites1234343", "Favorites", "Favorites") </lua> The last line will create a submenu with the unique id Favorites123.. under Favorites with the display name of Favorites.

addRoom

addRoom(roomID)

Creates a new room with the given ID, returns true if the room was successfully created.

Note: If you're not using incremental room IDs but room IDs stitched together from other factors or in-game hashes for room IDs - and your room IDs are starting off at 250+million numbers, you need to look into incrementally creating Mudlets room IDs with createRoomID() and associating your room IDs with Mudlets via setRoomIDbyHash() and getRoomIDbyHash(). The reason being is that Mudlet's A* pathfinding implementation from boost cannot deal with extremely large room IDs because the resulting matrices it creates for pathfinding are enormously huge.

addSpecialExit

addSpecialExit(roomIDFrom, roomIDTo, command)

Creates a one-way from one room to another, that will use the given command for going through them.

centerview

centerview (roomID)

Centers the map view onto the given room ID. The map must be open to see this take effect. This function can also be used to see the map of an area if you know the number of a room there and the area and room are mapped.

clearRoomUserData

clearRoomUserData(roomID)

Clears all user data from a given room.

clearSpecialExits

clearSpecialExits(roomID)

Removes all special exits from a room.

connectExitStub

connectExitStub(fromID, direction or toID[, optional direction])

Connects existing rooms with matching exit stubs. If you only give it a roomID and a direction, it'll work out which room should be linked to it that has an appropriate opposite exit stub and is located in the right direction. You can also just specify from and to room IDs, and it'll smartly use the right direction to link in. Lastly, you can specify all three arguments - fromID, toID and the direction (in that order) if you'd like to be explicit, or use setExit() for the same effect.

Parameters

fromID:

Room ID to set the exit stub in.

direction or toID:

You can either specify the direction to link the room in, or a specific room ID. Direction can be specified as a number, short direction name ("nw") or long direction name ("northwest").

toID:

Optional - the room ID to link this room to. If you don't specify it, the mapper will work out which room should be logically linked.

createMapLabel

labelID = createMapLabel(areaID, text, posx, posy, posz, fgRed, fgGreen, fgBlue, bgRed, bgGreen, bgBlue, zoom, fontSize, showOnTop, noScaling)

Creates a text label on the map at given coordinates, with the given background and foreground colors. It can go above or below the rooms, scale with zoom or stay a static size. It returns a label ID that you can use later for deleting it.

The coordinates 0,0 are in the middle of the map, and are in sync with the room coordinates - so using the x,y values of getRoomCoordinates() will place the label near that room.

createMapImageLabel

labelID = createMapImageLabel(areaID, filePath, posx, posy, posz, width, height, zoom, showOnTop)

Creates an image label on the map at the given coordinates, with the given dimensions and zoom. You might find the default room and image size correlation to be too big - try reducing the width and height of the image then, while also zooming in the same amount.

The coordinates 0,0 are in the middle of the map, and are in sync with the room coordinates - so using the x,y values of getRoomCoordinates() will place the label near that room.

createMapper

createMapper(x, y, width, height)

Creates a miniconsole window for the mapper to render in, the with the given dimensions. You can only create one mapper at a time.

Example

<lua> createMapper(0,0,300,300) -- creates a 300x300 mapper top-right of Mudlet setBorderLeft(305) -- adds a border so text doesn't underlap the mapper display </lua>

createRoomID

usableId = createRoomID()

Returns the lowest possible room ID you can use for creating a new room. If there are gaps in room IDs your map uses it, this function will go through the gaps first before creating higher IDs.

deleteArea

deleteArea(areaID)

Deletes the given area, permanently. This will also delete all rooms in it!

deleteMapLabel

deleteMapLabel(areaID, labelID)

Deletes a map label from a specfic area.

deleteRoom

deleteRoom(roomID)

Deletes an individual room, and unlinks all exits leading to and from it.

Example

<lua> deleteRoom(335) </lua>

getAreaExits

getAreaExits(areaID, showExits)

Returns a table (indexed or key-value) of the rooms in the given area that have exits leading out to other areas - that is, border rooms.

Parameters

areaID:

Area ID to list the exits for.

showExits:

Boolean argument, if true then the exits that lead out to another area will be listed for each room.

getAreaRooms

getAreaRooms(area id)

Returns an indexed table with all rooms IDs for a given area ID (room IDs are values), or nil if no such area exists.

Note: On Mudlet versions prior to the 2.0 final release, this function would raise an error.

Example

<lua> -- using the sample findAreaID() function defined in the getAreaTable() example, -- we'll define a function that echo's us a nice list of all rooms in an area with their ID function echoRoomList(areaname)

 local id, msg = findAreaID(areaname)
 if id then
   local roomlist, endresult = getAreaRooms(id), {}
 
   -- obtain a room list for each of the room IDs we got
   for _, id in ipairs(roomlist) do
     endresult[id] = getRoomName(id)
   end
 
   -- now display something half-decent looking
   cecho(string.format(
     "List of all rooms in %s (%d):\n", msg, table.size(endresult)))

   for roomid, roomname in pairs(endresult) do
     cecho(string.format(
       "%6s: %s\n", roomid, roomname))
   end
 elseif not id and msg then
   echo("ID not found; " .. msg)
 else
   echo("No areas matched the query.")
 end

end </lua>

getAreaTable

getAreaTable()

Returns a key(area name)-value(area id) table with all known areas and their IDs. There is an area with the name of and an ID of 0 included in it, you should ignore that.

getAreaTableSwap

getAreaTableSwap()

Returns a key(area id)-value(area name) table with all known areas and their IDs. Unlike getAreaTable which won't show you all areas with the same name by different IDs, this function will. There is an area with the name of and an ID of 0 included in it, you should ignore that.

getCustomEnvColorTable

envcolors = getCustomEnvColorTable()

Returns a table with customized environments, where the key is the environment ID and the value is a indexed table of rgb values.

Example

<lua> {

 envid1 = {r,g,b},
 envid2 = {r,g,b}

} </lua>

getCustomLines

getCustomLines(roomID): See also: addCustomLine()

Returns a table including all the details of the custom exit lines, if any, for the room with the Id given. Introduced in version 2.1 of Mudlet.

Parameters

roomID:

Room ID to return the custom line details of.

Example

<lua> display getCustomLines(1) {

 ["climb Rope"] = {
   attributes = {
     color = {
       b = 0,
       g = 128,
       r = 128
     },
     style = "dash dot dot line",
     arrow = false
   },
   points = {
     {
       y = 9.5,
       x = 4.5
     },
     {
       y = 9.5,
       x = 6
     },
     [0] = {
       y = 5.5,
       x = 4.5
     }
   }
 },
 N = {
   attributes = {
     color = {
       b = 255,
       g = 255,
       r = 0
     },
     style = "dot line",
     arrow = true
   },
   points = {
     [0] = {
       y = 27,
       x = -3
     }
   }
 }

} </lua>

getDoors

doors = getDoors(roomID)

Returns a key-value table with the cardinal direction as the key and the door value as a number. If there are no doors in a room, it returns an empty table.

Parameters

roomID:

Room ID to check for doors in.

getExitStubs

stubs = getExitStubs(roomid)

Returns an indexed table (starting at 0) of the direction #'s that have an exit stub marked in them. You can use this information to connect earlier-made exit stubs between rooms when mapping.

Example

<lua> -- show the exit stubs in room 6 as numbers local stubs = getExitStubs(6) for i = 0, #stubs do print(stubs[i]) end </lua>

getExitStubs1

stubs = getExitStubs1(roomid)

Returns an indexed table (starting at 1) of the direction #'s that have an exit stub marked in them. You can use this information to connect earlier-made exit stubs between rooms when mapping. As this function starts indexing from 1 as it is default in Lua, you can use ipairs() to iterate over the results.

Example

<lua> -- show the exit stubs in room 6 as numbers for k,v in ipairs(getExitStubs1(6)) do print(k,v) end </lua>

getExitWeights

weights = getExitWeights(roomid)

Returns a key-value table of the exit weights that a room has, with the direction or special exit as a key and the value as the exit weight. If a weight for a direction wasn't yet set, it won't be listed.

Parameters

roomid:

Room ID to view the exit weights in.

getMapLabel

labelinfo = getMapLabels(areaID, labelID)

Returns a key-value table describing that particular label in an area. Keys it contains are the X, Y, Z coordinates, Height and Width, and the Text it contains. If the label is an image label, then Text will be set to the no text string.

Example

<lua> lua getMapLabels(1658987) table {

 1: 'no text'
 0: 'test'

}

lua getMapLabel(1658987, 0) table {

 'Y': -2
 'X': -8
 'Z': 11
 'Height': 3.9669418334961
 'Text': 'test'
 'Width': 8.6776866912842

}

lua getMapLabel(1658987, 1) table {

 'Y': 8
 'X': -15
 'Z': 11
 'Height': 7.2520666122437
 'Text': 'no text'
 'Width': 11.21900844574

}

</lua>

getMapLabels

arealabels = getMapLabels(areaID)

Returns an indexed table (that starts indexing from 0) of all of the labels in the area, plus their label text. You can use the label id to deleteMapLabel() it.

Example

<lua> display(getMapLabels(43)) table {

 0: 
 1: 'Waterways'

}

deleteMapLabel(43, 0) display(getMapLabels(43)) table {

 1: 'Waterways'

} </lua>

getPath

getPath(roomID from, roomID to)

Returns a boolean true/false if a path between two room IDs is possible. If it is, the global speedWalkPath table is set to all of the directions that have to be taken to get there, and the global speedWalkDir table is set to all of the roomIDs you'll encounter on the way.

Example

<lua> -- check if we can go to a room - if yes, go to it if getPath(34,155) then

 gotoRoom(155)

else

 echo("\nCan't go there!")

end </lua>

getRoomArea

areaID = getRoomArea(roomID)

Returns the area ID of a given room ID. To get the area name, you can check the area ID against the data given by getAreaTable() function, or use the getRoomAreaName() function.

Note: If the room ID does not exist, this function will raise an error.

Example

<lua> display("Area ID of room #100 is: "..getRoomArea(100))

display("Area name for room #100 is: "..getRoomAreaName(getRoomArea(100))) </lua>

getRoomAreaName

areaname = getRoomAreaName(areaID)

Returns the area name for a given area id; logically it ought to return the area name for a given room id (or room name) but revising it so it does that would break existing scripts.

Example

<lua> echo(string.format("room id #455 is in %s.", getRoomAreaName(getRoomArea(455)))) </lua>

getRoomCoordinates

x,y,z = getRoomCoordinates(room ID)

Returns the room coordinates of the given room ID.

Example

<lua> local x,y,z = getRoomCoordinates(roomID) echo("Room Coordinates for "..roomID..":") echo("\n X:"..x) echo("\n Y:"..y) echo("\n Z:"..z) </lua>

getRoomEnv

envID = getRoomEnv(roomID)

Returns the environment ID of a room. The mapper does not store environment names, so you'd need to keep track of which ID is what name yourself.

Example

<lua> funtion checkID(id)

 echo(strinf.format("The env ID of room #%d is %d.\n", id, getRoomEnv(id)))

end </lua>

getRoomExits

getRoomExits (roomID): Returns the currently known non-special exits for a room in an key-index form: exit = exitroomid.

getRoomIDbyHash

roomID = getRoomIDbyHash(hash)

Returns a room ID that is associated with a given hash in the mapper. This is primarily for MUDs that make use of hashes instead of room IDs (like Avalon.de MUD). -1 is returned if no room ID matches the hash.

Example

<lua> -- example taken from http://forums.mudlet.org/viewtopic.php?f=13&t=2177 _id1 = getRoomIDbyHash( "5dfe55b0c8d769e865fd85ba63127fbc" ); if _id1 == -1 then

 _id1 = createRoomID()
 setRoomIDbyHash( _id1, "5dfe55b0c8d769e865fd85ba63127fbc" )
 addRoom( _id )
 setRoomCoordinates( _id1, 0, 0, -1 )

end </lua>

getRoomName

roomName = getRoomName(roomID)

Returns the room name for a given room id.

Example

<lua> echo(string.format("The name of the room id #455 is %s.", getRoomName(455)) </lua>

getRooms

rooms = getRooms()

Returns the list of all rooms in the map in the whole map in roomid - room name format.

Example

<lua> -- simple, raw viewer for rooms in the world display(getRooms()) </lua>

getRoomsByPosition

getRoomsByPosition(areaID, x,y,z)

Returns an indexed table of all rooms at the given coordinates in the given area, or an empty one if there are none. This function can be useful for checking if a room exists at certain coordinates, or whenever you have rooms overlapping.

Example

<lua> -- sample alias to determine a room nearby, given a relative direction from the current room

local otherroom if matches[2] == "" then

 local w = matches[3]
 local ox, oy, oz, x,y,z = getRoomCoordinates(mmp.currentroom)
 local has = table.contains
 if has({"west", "left", "w", "l"}, w) then
   x = (x or ox) - 1; y = (y or oy); z = (z or oz)
 elseif has({"east", "right", "e", "r"}, w) then
   x = (x or ox) + 1; y = (y or oy); z = (z or oz)
 elseif has({"north", "top", "n", "t"}, w) then
   x = (x or ox); y = (y or oy) + 1; z = (z or oz)
 elseif has({"south", "bottom", "s", "b"}, w) then
   x = (x or ox); y = (y or oy) - 1; z = (z or oz)
 elseif has({"northwest", "topleft", "nw", "tl"}, w) then
   x = (x or ox) - 1; y = (y or oy) + 1; z = (z or oz)
 elseif has({"northeast", "topright", "ne", "tr"}, w) then
   x = (x or ox) + 1; y = (y or oy) + 1; z = (z or oz)
 elseif has({"southeast", "bottomright", "se", "br"}, w) then
   x = (x or ox) + 1; y = (y or oy) - 1; z = (z or oz)
 elseif has({"southwest", "bottomleft", "sw", "bl"}, w) then
   x = (x or ox) - 1; y = (y or oy) - 1; z = (z or oz)
 elseif has({"up", "u"}, w) then
   x = (x or ox); y = (y or oy); z = (z or oz) + 1
 elseif has({"down", "d"}, w) then
   x = (x or ox); y = (y or oy); z = (z or oz) - 1
 end

 local carea = getRoomArea(mmp.currentroom)
 if not carea then mmp.echo("Don't know what area are we in.") return end

 otherroom = select(2, next(getRoomsByPosition(carea,x,y,z)))

 if not otherroom then
   mmp.echo("There isn't a room to the "..w.." that I see - try with an exact room id.") return
 else
   mmp.echo("The room "..w.." of us has an ID of "..otherroom)
 end

</lua>

getRoomUserData

data = getRoomUserData(roomID, key (as a string))

Returns the user data stored at a given room with a given key, or "" if none is stored. Use setRoomUserData() function for setting the user data.

Example

<lua> display(getRoomUserData(341, "visitcount")) </lua>

getRoomWeight

room weight = getRoomWeight(roomID)

Returns the weight of a room. By default, all new rooms have a weight of 1.

getSpecialExits

exits = getSpecialExits(roomID)

Returns a roomid - command table of all special exits in the room. If there are no special exits in the room, the table returned will be empty.

getSpecialExitsSwap

exits = getSpecialExitsSwap(roomID)

Very similar to getSpecialExits() function, but returns the rooms in the command - roomid style.

gotoRoom

gotoRoom (roomID): Speedwalks you to the given room from your current room if it is able and knows the way. You must turn the map on for this to work, else it will return "(mapper): Don't know how to get there from here :(".

hasExitLock

status = hasExitLock(roomID, direction)

Returns true or false depending on whenever a given exit leading out from a room is locked. Direction can be specified as a number, short direction name ("nw") or long direction name ("northwest").

Example

<lua> -- check if the east exit of room 1201 is locked display(hasExitLock(1201, 4)) display(hasExitLock(1201, "e")) display(hasExitLock(1201, "east")) </lua>

hasSpecialExitLock

status = hasSpecialExitLock(from roomID, to roomID, command)

Returns true or false depending on whenever a given exit leading out from a room is locked. command is the action to take to get through the gate.

<lua> -- lock a special exit from 17463 to 7814 that uses the 'enter feather' command lockSpecialExit(17463, 7814, 'enter feather', true)

-- see if it is locked: it will say 'true', it is display(hasSpecialExitLock(17463, 7814, 'enter feather')) </lua>

highlightRoom

highlightRoom( id, r1,g1,b1,r2,g2,b2, radius, alpha1, alpha2)

Highlights a room with the given color, which will override it's environment color. If you use two different colors, then there'll be a shading from the center going outwards that changes into the other color. highlightRadius is the radius for the highlight circle - if you don't want rooms beside each other to over lap, use 1 as the radius. alphaColor1 and alphaColor2 are transparency values from 0 (completely transparent) to 255 (not transparent at all).

exportAreaImage

exportAreaImage(areaID)

Exports the area as an image into your profile's directory.

Example

<lua> -- save the area with ID 1 as a map exportAreaImage(1) </lua>

loadMap

boolean = loadMap(file location)

Loads the map file from a given location. The map file must be in Mudlet's format (not XML or any other) - saved with saveMap().

Returns a boolean for whenever the loading succeeded. Note that the mapper must be open, or this will fail.

lockExit

lockExit(roomID, direction, lock = true/false)

Locks a given exit from a room (which means that unless all exits in the incoming room are locked, it'll still be accessible). Direction can be specified as a number, short direction name ("nw") or long direction name ("northwest").

Example

<lua> -- lock the east exit of room 1201 so we never path through it lockExit(1201, 4, true) </lua>

lockRoom

lockRoom (roomID, lock = true/false)

Locks a given room id from future speed walks (thus the mapper will never path through that room).

lockSpecialExit

lockSpecialExit (from roomID, to roomID, special exit command, lock = true/false)

Locks a given special exit, leading from one specific room to another that uses a certain command from future speed walks (thus the mapper will never path through that special exit).

Example

<lua> lockSpecialExit(1,2,'enter gate', true) -- locks the special exit that does 'enter gate' to get from room 1 to room 2 lockSpecialExit(1,2,'enter gate', false) -- unlocks the said exit </lua>

resetRoomArea

resetRoomArea (areaID)

Unassigns the room from its given area. While not assigned, its area ID will be -1.

removeMapEvent

removeMapEvent (event name)

Removes the given menu entry from a mappers right-click menu. You can add custom ones with addMapEvent().

Example

<lua> addMapEvent("room a", "onFavorite") -- add one to the general menu removeMapEvent("room a") -- removes the said menu </lua>

roomExists

roomExists(roomID)

Returns a boolean true/false depending if the room with that ID exists (is created) or not.

roomLocked

locked = roomLocked(roomID)

Returns true or false whenever a given room is locked.

saveMap

saveMap(location)

Saves the map to a given location, and returns true on success. The location folder needs to be already created for save to work.

searchRoom

searchRoom (room name / room number)

Searches for rooms that match (by case-insensitive, substring match) the given room name. It returns a key-value table in form of roomid = roomname.

If you pass it a number instead of a string, it'll act like getRoomName() and return you the room name.

Example

<lua> display(searchRoom("master"))

--[[ would result in: table {

 17463: 'in the branches of the Master Ravenwood'
 3652: 'master bedroom'
 10361: 'Hall of Cultural Masterpieces'
 6324: 'Exhibit of the Techniques of the Master Artisans'
 5340: 'office of the Guildmaster'
 (...)
 2004: 'office of the guildmaster'
 14457: 'the Master Gear'
 1337: 'before the Master Ravenwood Tree'

} ]]</lua>

If no rooms are found, then an empty table is returned.

searchRoomUserData

Two related commands that search though all the rooms in sequence (so not as fast as a user built/maintained index system) and find/reports on the room user data stored:
searchRoomUserData(key, value)

Reports a (sorted) list of all room ids with user data with the given "value" for the given (case sensitive) "key". Due to the lack of previous enforcement it is possible (though not recommended) to have a room user data item with an empty string "" as a key, this is handled correctly.

searchRoomUserData(key)

Reports a (sorted) list of the unique values from all rooms with user data with the given (case sensitive) "key". Due to the lack of previous enforcement it is possible (though not recommended) to have a room user data item with an empty string "" as a key, this is handled correctly.

Examples

<lua> -- if I had stored the details of "named doors" as part of the room user data -- display(searchRoomUserData("doorname_up"))

--[[ could result in a list: {

 "Eastgate",
 "Northgate",
 "boulderdoor",
 "chamberdoor",
 "dirt",
 "floorboards",
 "floortrap",
 "grate",
 "irongrate",
 "rockwall",
 "tomb",
 "trap",
 "trapdoor"

}]]

-- then taking one of these keys -- display(searchRoomUserData("doorname_up","trapdoor"))

--[[ might result in a list: {

} ]]</lua>

Both these commands are present in the development code branch at GitHub repository and are to be included in 3.0.0 and preview releases thereof after delta (added to repository branch code since that preview).

setAreaName

setAreaName(areaID, newName)

Names, or renames an existing area to the new name. The area must be created first with addAreaName().

setCustomEnvColor

setCustomEnvColor(environmentID, r,g,b,a)

Creates, or overrides an already created custom color definition for a given environment ID. Note that this will not work on the default environment colors - those are adjustable by the user in the preferences. You can however create your own environment and use a custom color definition for it.

Note: Numbers 1-16 and 257-272 are reserved by Mudlet. 257-272 are the default colors the user can adjust in mapper settings, so feel free to use them if you'd like - but don't overwrite them with this function.

Example

<lua> setRoomEnv(571, 200) -- change the room's environment ID to something arbitrary, like 200 local r,g,b = unpack(color_table.blue) setCustomEnvColor(200, r,g,b, 255) -- set the color of environmentID 200 to blue </lua>

setDoor

setDoor(roomID, exitCommand, doorStatus)

Creates or deletes a door in a room. Doors are purely visual - they don't affect pathfinding. You can use the information to change to adjust your speedwalking path based on the door information in a room, though.

Parameters

roomID:

Room ID to to create the door in.

exitCommand:

The cardinal direction for the door is in - it can be one of the following: e,s,w,n,ne,se,sw,ne. {Plans are afoot to add support for doors on the other normal exits: up,down,in,out and also on special exits though more work will be needed for them to be shown in the mapper.}

doorStatus:

The door status as a number - 0 means remove door, 1 means open door (will draw a green square on exit), 2 means closed door (yellow square) and 3 means locked door (red square).

setExit

setExit(from roomID, to roomID, direction)

Creates a one-way exit from one room to another using a standard direction - which can be either one of n, ne, nw, e, w, s, se, sw, u, d, in, out, the long version of a direction, or a number which represents a direction. If there was an exit stub in that direction already, then it will be automatically deleted for you.

Returns false if the exit creation didn't work.

Example

<lua> -- alias pattern: ^exit (\d+) (\d+) (\w+)$ -- so exit 1 2 5 will make an exit from room 1 to room 2 via north

if setExit(tonumber(matches[2]), tonumber(matches[3]), matches[4]) then

 echo("\nExit set to room:"..matches[3].." from "..matches[2]..", direction:"..string.upper(matches[3]))

else

 echo("Failed to set the exit.\n")

end </lua>

This function can also delete exits from a room if you use it like so:

<lua>setExit(from roomID, -1, direction)</lua>

- which will delete an outgoing exit in the specified direction from a room.

setExitStub

setExitStub(roomID, direction, set/unset)

Creates or removes an exit stub from a room in a given directions. You can use exit stubs later on to connect rooms that you're sure of are together. Exit stubs are also shown visually on the map, so the mapper can easily tell which rooms need finishing.

Parameters

roomID:

The room to place an exit stub in, as a number.

direction:

The direction the exit stub should lead in - as a number, short direction name ("nw") or long direction name ("northwest").

set/unset:

A boolean to create or delete the exit stub.

Example

Create an exit stub to the south from room 6: <lua> setExitStub(8, 6, true) </lua>

.. or using an exitmap (see Mapping_script#Translating_directions): <lua> setExitStub(8, exitmap.s, true) </lua>

How to delete all exit stubs in a room: <lua> for i,v in pairs(getExitStubs(roomID)) do

 setExitStub(roomID, v,false)

end </lua>

setExitWeight

setExitWeight(roomID, exitCommand, weight)

Gives an exit a weight, which makes it less likely to be chosen for pathfinding. All exits have a weight of 0 by default, which you can increase. Exit weights are set one-way on an exit - if you'd like the weight to be applied both ways, set it from the reverse room and direction as well.

Parameters

roomID:

Room ID to to set the weight in.

exitCommand:

The the direction for the exit is in - it can be one of the following: e,s,w,n,ne,se,sw,ne,up,down,in,out, or if it's a special exit, the special exit command.

weight:

Exit weight - by default, all exits have a weight of 0. Increasing the weight will make the room less likely be chosen for pathfinding.

setGridMode

setGridMode(areaID, true/false)

Enables grid/wilderness view mode for an area - this will cause the rooms to lose their visible exit connections, like you'd see on compressed ASCII maps, both in 2D and 3D view mode.

Example

<lua> setGridMode(55, true) -- set area with ID 55 to be in grid mode </lua>

setMapZoom

setMapZoom(zoom)

Zooms the map in to a given zoom level. 1 is the closest you can get, and anything higher than that zooms the map out. Call centerview() after you set the zoom to refresh the map.

Example

<lua> setMapZoom(10) -- zoom to a somewhat acceptable level, a bit big but easily visible connections </lua>

setModulePriority

setModulePriority(module name, priority #)

Sets the module priority on a given module as a number - the module priority determines the order modules are loaded in, which can be helpful if you have ones dependent on each other. This can also be set from the module manager window.

setRoomArea

setRoomArea(roomID, newAreaID)

Assigns the given room to a new area. This will have the room be visually moved into the area as well.

setRoomChar

setRoomChar(roomID, character)

Designed for an area in grid mode, this will set a single character to be on a room. You can use "_" to clear it.

Example

<lua> setRoomChar(431, "#")

setRoomChar(123. "$") </lua>

setRoomCoordinates

setRoomCoordinates(roomID, x, y, z)

Sets the given room ID to be at the following coordinates visually on the map, where z is the up/down level.

Note: 0,0,0 is the center of the map.

Example

<lua> -- alias pattern: ^set rc (-?\d+) (-?\d+) (-?\d+)$ local x,y,z = getRoomCoordinates(previousRoomID) local dir = matches[2]

if dir == "n" then

 y = y+1

elseif dir == "ne" then

 y = y+1
 x = x+1

elseif dir == "e" then

 x = x+1

elseif dir == "se" then

 y = y-1
 x = x+1

elseif dir == "s" then

 y = y-1

elseif dir == "sw" then

 y = y-1
 x = x-1

elseif dir == "w" then

 x = x-1

elseif dir == "nw" then

 y = y+1
 x = x-1

elseif dir == "u" or dir == "up" then

 z = z+1

elseif dir == "down" then

 z = z-1

end setRoomCoordinates(roomID,x,y,z) centerview(roomID) </lua>

You can make them relative as well:

<lua> -- alias pattern: ^src (\w+)$

local x,y,z = getRoomCoordinates(previousRoomID) local dir = matches[2]

if dir == "n" then

 y = y+1

elseif dir == "ne" then

 y = y+1
 x = x+1

elseif dir == "e" then

 x = x+1

elseif dir == "se" then

 y = y-1
 x = x+1

elseif dir == "s" then

 y = y-1

elseif dir == "sw" then

 y = y-1
 x = x-1

elseif dir == "w" then

 x = x-1

elseif dir == "nw" then

 y = y+1
 x = x-1

elseif dir == "u" or dir == "up" then

 z = z+1

elseif dir == "down" then

 z = z-1

end setRoomCoordinates(roomID,x,y,z) centerview(roomID) </lua>

setRoomEnv

setRoomEnv(roomID, newEnvID)

Sets the given room to a new environment ID. You don't have to use any functions to create it - can just set it right away.

Example

<lua> setRoomEnv(551, 34) -- set room with the ID of 551 to the environment ID 34 </lua>

setRoomIDbyHash

setRoomIDbyHash(roomID, hash)

Sets the hash to be associated with the given roomID. See also getRoomIDbyHash().

setRoomName

setRoomName(roomID, newName)

Renames an existing room to a new name.

Example

<lua> setRoomName(534, "That evil room I shouldn't visit again.") lockRoom(534, true) -- and lock it just to be safe </lua>

setRoomUserData

setRoomUserData(roomID, key (as a string), value (as a string))

Stores information about a room under a given key. Similar to Lua's key-value tables, except only strings may be used here. One advantage of using userdata is that it's stored within the map file itself - so sharing the map with someone else will pass on the user data. You can have as many keys as you'd like.

Returns true if successfully set.

setRoomWeight

setRoomWeight(roomID, weight)

Sets a weight to the given roomID. By default, all rooms have a weight of 1 - the higher the weight is, the more likely the room is to be avoided for pathfinding. For example, if travelling across water rooms takes more time than land ones - then you'd want to assign a weight to all water rooms, so they'd be avoided if there are possible land pathways.

Note: The minimum allowed room weight is 1.

To completely avoid a room, make use of lockRoom().

speedwalk

speedwalk(dirString, backwards, delay)

A speedwalking function will work on cardinal+ordinal directions (n, ne, e, etc.) as well as u (for up), d (for down), in and out. It can be called to execute all directions directly after each other, without delay, or with a custom delay, depending on how fast your mud allows you to walk. It can also be called with a switch to make the function reverse the whole path and lead you backwards.

Call the function by doing: speedwalk("YourDirectionsString", true/false, delaytime)

The delaytime parameter will set a delay between each move (set it to 0.5 if you want the script to move every half second, for instance). It is optional: If you don't indicate it, the script will send all direction commands right after each other. (If you want to indicate a delay, you -have- explicitly indicate true or false for the reverse flag.)

The "YourDirectionsString" contains your list of directions and steps (e.g.: "2n, 3w, u, 5ne"). Numbers indicate the number of steps you want it to walk in the direction specified after it. The directions must be separated by anything other than a letter that can appear in a direction itself. (I.e. you can separate with a comma, spaces, the letter x, etc. and any such combinations, but you cannot separate by the letter "e", or write two directions right next to each other with nothing in-between, such as "wn". If you write a number before every direction, you don't need any further separator. E.g. it's perfectly acceptable to write "3w1ne2e".) The function is not case-sensitive.

If your Mud only has cardinal directions (n,e,s,w and possibly u,d) and you wish to be able to write directions right next to each other like "enu2s3wdu", you'll have to change the pattern slightly. (See the link at the beginning of my post for something like that.)

Likewise, if your Mud has any other directions than n, ne, e, se, s, sw, w, nw, u, d, in, out, the function must be adapted to that.

Example

<lua> speedwalk("16d1se1u") -- Will walk 16 times down, once southeast, once up. All in immediate succession.

speedwalk("2ne,3e,2n,e") -- Will walk twice northeast, thrice east, twice north, once east. All in immediate succession.

speedwalk("IN N 3W 2U W", false, 0.5) -- Will walk in, north, thrice west, twice up, west, with half a second delay between every move.

speedwalk("5sw - 3s - 2n - w", true) -- Will walk backwards: east, twice south, thrice, north, five times northeast. All in immediate succession.

speedwalk("3w, 2ne, w, u", true, 1.25) -- Will walk backwards: down, east, twice southwest, thrice east, with 1.25 seconds delay between every move. </lua>

Note: The probably most logical usage of this would be to put it in an alias. For example, have the pattern ^/(.+)$ execute: speedwalk(matches[2], false, 0.7) And have ^//(.+)$ execute: speedwalk(matches[2], true, 0.7) Or make aliases like: ^banktohome$ to execute <lua>speedwalk("2ne,e,ne,e,3u,in", true, 0.5)</lua>

unHighlightRoom

unHighlightRoom(roomID)

Unhighlights a room if it was previously highlighted and restores the rooms original environment color.