Revision as of 08:30, 1 December 2020

Miscellaneous Functions

addSupportedTelnetOption

addSupportedTelnetOption(option): Adds a telnet option, which when queried by a MUD server, Mudlet will return DO (253) on. Use this to register the telnet option that you will be adding support for with Mudlet - see additional protocols section for more.

Example

<event handlers that add support for MSDP... see http://www.mudbytes.net/forum/comment/63920/#c63920 for an example>

-- register with Mudlet that it should not decline the request of MSDP support
local TN_MSDP = 69
addSupportedTelnetOption(TN_MSDP)

alert

alert([seconds]): alerts the user to something happening - makes Mudlet flash in the Windows window bar, bounce in the macOS dock, or flash on Linux.

Note: Available in Mudlet 3.2+

Parameters

seconds:

(optional) number of seconds to have the alert for. If not provided, Mudlet will flash until the user opens Mudlet again.

Example

-- flash indefinitely until Mudlet is open
alert()

-- flash for just 3 seconds
alert(3)

cfeedTriggers

cfeedTriggers(text): Like feedTriggers, but you can add color information using color names, similar to cecho.

Parameters

text: The string to feed to the trigger engine. Include colors by name as black,red,green,yellow,blue,magenta,cyan,white and light_* versions of same. You can also use a number to get the ansi color corresponding to that number.

closeMudlet

closeMudlet()

Closes Mudlet and all profiles immediately.

denyCurrentSend

denyCurrentSend()

Cancels a send() or user-entered command, but only if used within a sysDataSendRequest event.

Example

-- cancels all "eat hambuger" commands
function cancelEatHamburger(event, command)
  if command == "eat hamburger" then
    denyCurrentSend()
    cecho("<red>Denied! Didn't let the command through.\n")
  end
end

registerAnonymousEventHandler("sysDataSendRequest", "cancelEatHamburger")

dfeedTriggers

dfeedTriggers(str): Like feedTriggers, but you can add color information using <r,g,b>, similar to decho.

Parameters

str: The string to feed to the trigger engine. Include color information inside tags like decho.

disableModuleSync

disableModuleSync(name): Stops syncing the given module.

Parameter

name: name of the module.

Note: Available in Mudlet 4.8+

enableModuleSync

enableModuleSync(name): Enables the sync for the given module name - any changes done to it will be saved to disk and if the module is installed in any other profile(s), it'll be updated in them as well on profile save.

Parameter

name: name of the module to enable sync on.

Note: Available in Mudlet 4.8+

expandAlias

expandAlias(command, [echoBackToBuffer]): Runs the command as if it was from the command line - so aliases are checked and if none match, it's sent to the game unchanged.

Parameters

command

Text of the command you want to send to the game. Will be checked for aliases.

echoBackToBuffer

(optional) If false, the command will not be echoed back in your buffer. Defaults to true if omitted.

Note: Using expandAlias is not recommended anymore as it is not very robust and may lead to problems down the road. The recommendation is to use lua functions instead. See Manual:Functions_vs_expandAlias for details and examples.

Note: If you want to be using the matches table after calling expandAlias, you should save it first, as, e.g. local oldmatches = matches before calling expandAlias, since expandAlias will overwrite it after using it again.

Note: Since Mudlet 3.17.1 the optional second argument to echo the command on screen will be ineffective whilst the game server has negotiated the telnet ECHO option to provide the echoing of text we send to him.

Example

expandAlias("t rat")

-- don't echo the command
expandAlias("t rat", false)

feedTriggers

feedTriggers(text[, dataIsUtf8Encoded = true]): This function will have Mudlet parse the given text as if it came from the MUD - one great application is trigger testing. The built-in `echo alias provides this functionality as well.

Parameters

text:

string which is sent to the trigger processing system almost as if it came from the MUD Game Server. This string must be byte encoded in a manner to match the currently selected Server Encoding.

dataIsUtf8Encoded:

Set this to false, if you need pre-Mudlet 4.0 behavior. Most players won't need this.

(Before Mudlet 4.0 the text had to be encoded directly in whatever encoding the setting in the preferences was set to.

(Encoding could involve using the Lua string character escaping mechanism of \ and a base 10 number for character codes from \1 up to \255 at maximum)

Since Mudlet 4.0 it is assumed that the text is UTF-8 encoded. It will then be automatically converted to the currently selected MUD Game Server encoding.

Preventing the automatic conversion can be useful to Mudlet developers testing things, or possibly to those who are creating handlers for Telnet protocols within the Lua subsystem, who need to avoid the transcoding of individual protocol bytes, when they might otherwise be seen as extended ASCII characters.)

Returns

true on success, nil and an error message if the text contains characters that cannot be conveyed by the current Game Server encoding.

Note: Both the optional parameter dataIsUtf8Encoded and the returned value are only available since Mudlet 4.2.0

Note: It is important to ensure that in Mudlet 4.0.0 and beyond the text data only contains characters that can be encoded in the current Game Server encoding, from 4.2.0 the content is checked that it can successfully be converted from the UTF-8 that the Mudlet Lua subsystem uses internally into that particular encoding and if it cannot the function call will fail and not pass any of the data, this will be significant if the text component contains any characters that are not plain ASCII.

Example

-- try using this on the command line
`echo This is a sample line from the game

-- You can use \n to represent a new line - you also want to use it before and after the text you’re testing, like so:
feedTriggers("\nYou sit yourself down.\n")

-- The function also accept ANSI color codes that are used in MUDs. A sample table can be found http://codeworld.wikidot.com/ansicolorcodes
feedTriggers("\nThis is \27[1;32mgreen\27[0;37m, \27[1;31mred\27[0;37m, \27[46mcyan background\27[0;37m," ..
"\27[32;47mwhite background and green foreground\27[0;37m.\n")

getCharacterName

getCharacterName()

Returns the name entered into the "Character name" field on the Connection Preferences form. Can be used to find out the name that might need to be handled specially in scripts or anything that needs to be personalized to the player. If there is nothing set in that entry will return an empty string.

Introduced along with two other functions to enable MUD Game server log-in to be scripted with the simultaneous movement of that functionality from the Mudlet application core code to a predefined doLogin() function that may be replaced for more sophisticated requirements.

Note: Expected to be available from Mudlet 4.11

Example

lua send("cast 'glamor' " .. getCharacterName())

You get a warm feeling passing from your core to the tips of your hands, feet and other body parts.
A small twittering bird settles on your shoulder and starts to look adoringly at you.
A light brown faun gambles around you and then nuzzles your hand.
A tawny long-haired cat saunters over and start to rub itself against your ankles.
A small twittering bird settles on your shoulder and starts to look adoringly at you.
A light brown faun gambles around you and then nuzzles your hand.
A small twittering bird settles on your shoulder and starts to look adoringly at you.
A mangy dog trots up to you and proceeds to mark the bottom of your leggings.

getModulePath

path = getModulePath(module name)

Returns the location of a module on the disk. If the given name does not correspond to an installed module, it'll return nil

getModulePriority

priority = getModulePriority(module name)

Returns the priority of a module as an integer. This determines the order modules will be loaded in - default is 0. Useful if you have a module that depends on another module being loaded first, for example.

getModuleSync

getModuleSync(name): returns false if module sync is not active, true if it is active and nil if module is not found.

Parameter

name: name of the module

Note: Available in Mudlet 4.8+

getMudletHomeDir

getMudletHomeDir(): Returns the current home directory of the current profile. This can be used to store data, save statistical information, or load resource files from packages.

Note: intentionally uses forward slashes / as separators on Windows since stylesheets require them.

Example

-- save a table
table.save(getMudletHomeDir().."/myinfo.dat", myinfo)

-- or access package data. The forward slash works even on Windows fine
local path = getMudletHomeDir().."/mypackagename"

getMudletInfo

getMudletInfo(): Prints debugging information about the Mudlet that you're running - this can come in handy for diagnostics.

Don't use this command in your scripts to find out if certain features are supported in Mudlet - there are better functions available for this.

Note: Available since Mudlet 4.8+

Example

getMudletInfo()

getMudletVersion

getMudletVersion(style): Returns the current Mudlet version. Note that you shouldn't hardcode against a specific Mudlet version if you'd like to see if a function is present - instead, check for the existence of the function itself. Otherwise, checking for the version can come in handy if you'd like to test for a broken function or so on.

getOS

getOS()

Returns the name of the Operating system. Useful for applying particular scripts only under particular operating systems, such as applying a stylesheet only when the OS is Windows.

Returned string will be one of these: "cygwin", "windows", "mac", "linux", "hurd", "freebsd", "kfreebsd", "openbsd", "netbsd", "bsd4", "unix" or "unknown" otherwise.

Example

display(getOS())

if getOS() == "windows" then
  echo("\nWindows OS detected.\n")
else
  echo("\nDetected Operating system is NOT windows.\n")
end

Using getOS() to detect a specific Windows version

Example

local os = getOS()
if os ~= "windows" then
  echo("\nToday we'd like to detect only windows version\n")
end

-- open command window and send "ver"
local f = io.popen("ver") 
-- read command output
local ver = f:read("*a")
-- close the windows (user may see a small flicker on screen)
f:close()
-- Example output: Microsoft Windows [Version 6.1.7601]
-- Output may change due to language settings so use a language indipendent regexp
local major = rex.match(ver,"\w+ ([0-9]+)\.[\d\.]+") --
if major == nil then 
  echo("\nNo version detect. Very bad!\n")      
else
  echo("\nVersion is: " .. major .. "!\n") 
end

getProfileName

getProfileName()

Returns the name of the profile. Useful when combined with raiseGlobalEvent() to know which profile a global event came from.

Note: Available in Mudlet 3.1+

Example

-- if connected to the Achaea profile, will print Achaea to the main console
echo(getProfileName())

getCommandSeparator

getCommandSeparator()

Returns the command separator in use by the profile.

Note: Available in Mudlet 3.18+

Example

-- if your command separator is ;;, the following would send("do thing 1;;do thing 2"). 
-- This way you can determine what it is set to and use that and share this script with 
-- someone who has changed their command separator.
-- Note: This is not really the preferred way to send this, using sendAll("do thing 1", "do thing 2") is,
--       but this illustates the use case.
local s = getCommandSeparator()
expandAlias("do thing 1" .. s .. "do thing 2")

getServerEncoding

getServerEncoding(): Returns the current server data encoding in use.

Example

getServerEncoding()

getServerEncodingsList

getServerEncodingsList(): Returns an indexed list of the server data encodings that Mudlet knows. This is not the list of encodings the servers knows - there's unfortunately no agreed standard for checking that. See encodings in Mudlet for the list of which encodings are available in which Mudlet version.

Example

-- check if UTF-8 is available:
if table.contains(getServerEncodingsList(), "UTF-8") then
  print("UTF-8 is available!")
end

getWindowsCodepage

getWindowsCodepage(): Returns the current codepage of your Windows system.

Note: Available since Mudlet 3.22 Note: This function only works on Windows - It is only needed internally in Mudlet to enable Lua to work with non-ASCII usernames (e.g. Iksiński, Jäger) for the purposes of IO. Linux and macOS work fine with with these out of the box.

Example

print(getWindowsCodepage())

hfeedTriggers

hfeedTriggers(str): Like feedTriggers, but you can add color information using #RRGGBB in hex, similar to hecho.

Parameters

str: The string to feed to the trigger engine. Include color information in the same manner as hecho.

installModule

installModule(location): Installs a Mudlet XML, zip, or mpackage as a module.

Parameters

location:

Exact location of the file install.

Example

installModule([[C:\Documents and Settings\bub\Desktop\myalias.xml]])

installPackage

installPackage(location): Installs a Mudlet XML or package.

Parameters

location:

Exact location of the xml or package to install.

killAnonymousEventHandler

killAnonymousEventHandler(handler id): Disables and removes the given event handler.

Parameters

handler id

ID of the event handler to remove as returned by the registerAnonymousEventHandler function.

loadWindowLayout

loadWindowLayout(): Resets the layout of userwindows (floating miniconsoles) to the last saved state.

mudletOlderThan

mudletOlderThan(major, [minor], [patch]): Returns true if Mudlet is older than the given version to check. This is useful if you'd like to use a feature that you can't check for easily, such as coroutines support. However, if you'd like to check if a certain function exists, do not use this and use if mudletfunction then - it'll be much more readable and reliable.

openWebPage

openWebPage(URL): Opens the browser to the given webpage.

Parameters

URL:

Exact URL to open.

Example

openWebPage("http://google.com")

Note: This function can be used to open a local file or file folder as well by using "file:///" and the file path instead of "http://".

Example

openWebPage("file:///"..getMudletHomeDir().."file.txt")

playSoundFile

playSoundFile(fileName, volume): This function plays a sound file (no limit on how many you can start).

Parameters

fileName:

Exact path of the sound file.

volume:

Set the volume (in percent) of the sound. If no volume is given, 100 (maximum) is used.

Optional, available since 3.0

registerAnonymousEventHandler

registerAnonymousEventHandler(event name, functionReference, [one shot]): Registers a function to an event handler, not requiring you to set one up via script. See here for a list of Mudlet-raised events. The function may be refered to either by name as a string containing a global function name, or with the lua function object itself.

The optional one shot parameter allows you to automatically kill an event handler after it is done by giving a true value. If the event you waited for did not occur yet, return true from the function to keep it registered.

The function returns an ID that can be used in killAnonymousEventHandler() to unregister the handler again.

If you use an asterisk ("*") as the event name, your code will capture all events. Useful for debugging, or integration with external programs.

Note: The ability to refer lua functions directly, the one shot parameter and the returned ID are features of Mudlet 3.5 and above.

Note: The "*" all-events capture was added in Mudlet 4.10.

See also: killAnonymousEventHandler(), raiseEvent(),

Example

-- example taken from the God Wars 2 (http://godwars2.org) Mudlet UI - forces the window to keep to a certain size
function keepStaticSize()
  setMainWindowSize(1280,720)
end -- keepStaticSize

if keepStaticSizeEventHandlerID then killAnonymousEventHandler(keepStaticSizeEventHandlerID) end -- clean up any already registered handlers for this function
keepStatisSizeEventHandlerID = registerAnonymousEventHandler("sysWindowResizeEvent", "keepStaticSize") -- register the event handler and save the ID for later killing

-- simple inventory tracker for GMCP enabled games. This version does not leak any of the methods
-- or tables into the global namespace. If you want to access it, you should export the inventory
-- table via an own namespace.
local inventory = {}

local function inventoryAdd()
  if gmcp.Char.Items.Add.location == "inv" then
    inventory[#inventory + 1] = table.deepcopy(gmcp.Char.Items.Add.item)
  end
end
if inventoryAddHandlerID then killAnonymousEventHandler(inventoryAddHandlerID) end -- clean up any already registered handlers for this function
inventoryAddHandlerID = registerAnonymousEventHandler("gmcp.Char.Items.Add", inventoryAdd) -- register the event handler and save the ID for later killing

local function inventoryList()
  if gmcp.Char.Items.List.location == "inv" then
    inventory = table.deepcopy(gmcp.Char.Items.List.items)
  end
end
if inventoryListHandlerID then killAnonymousEventHandler(inventoryListHandlerID) end -- clean up any already registered handlers for this function
inventoryListHandlerID = registerAnonymousEventHandler("gmcp.Char.Items.List", inventoryList) -- register the event handler and save the ID for later killing

local function inventoryUpdate()
  if gmcp.Char.Items.Remove.location == "inv" then
    local found
    local updatedItem = gmcp.Char.Items.Update.item
    for index, item in ipairs(inventory) do
      if item.id == updatedItem.id then
        found = index
        break
      end
    end
    if found then
      inventory[found] = table.deepcopy(updatedItem)
    end
  end
end
if inventoryUpdateHandlerID then killAnonymousEventHandler(inventoryUpdateHandlerID) end -- clean up any already registered handlers for this function
inventoryUpdateHandlerID = registerAnonymousEventHandler("gmcp.Char.Items.Update", inventoryUpdate)

local function inventoryRemove()
  if gmcp.Char.Items.Remove.location == "inv" then
    local found
    local removedItem = gmcp.Char.Items.Remove.item
    for index, item in ipairs(inventory) do
      if item.id == removedItem.id then
        found = index
        break
      end
    end
    if found then
      table.remove(inventory, found)
    end
  end
end
if inventoryRemoveHandlerID then killAnonymousEventHandler(inventoryRemoveHandlerID) end -- clean up any already registered handlers for this function
inventoryRemoveHandlerID = registerAnonymousEventHandler("gmcp.Char.Items.Remove", inventoryRemove)

-- downloads a package from the internet and kills itself after it is installed.
local saveto = getMudletHomeDir().."/dark-theme-mudlet.zip"
local url = "http://www.mudlet.org/wp-content/files/dark-theme-mudlet.zip"

if myPackageInstallHandler then killAnonymousEventHandler(myPackageInstallHandler) end
myPackageInstallHandler = registerAnonymousEventHandler(
  "sysDownloadDone",
  function(_, filename)
    if filename ~= saveto then
      return true -- keep the event handler since this was not our file
    end
    installPackage(saveto)
    os.remove(b)
  end,
  true
)

downloadFile(saveto, url)
cecho("<white>Downloading <green>"..url.."<white> to <green>"..saveto.."\n")

reloadModule

reloadModule(module name): Reload a module (by uninstalling and reinstalling).

Example

reloadModule("3k-mapper")

resetProfile

resetProfile()

Reloads your entire Mudlet profile - as if you've just opened it. All UI elements will be cleared, so this useful when you're coding your UI.

Example

resetProfile()

The function used to require input from the game to work, but as of Mudlet 3.20 that is no longer the case.

Note: Don't put resetProfile() in the a script-item in the script editor as the script will be reloaded by resetProfile() as well better use

lua resetProfile()

in your commandline or make an Alias containing resetProfile().

saveProfile

saveProfile()

Saves the current Mudlet profile to disk, which is equivalent to pressing the "Save Profile" button.

Example

saveProfile()

saveWindowLayout

saveWindowLayout: Saves the layout of userwindows (floating miniconsoles), in case you'd like to load them again later.

sendCharacterName

sendCharacterName()

Sends the name entered into the "Character name" field on the Connection Preferences form directly to the MUD Game Server. Returns true unless there is nothing set in that entry in which case a nil and an error message will be returned instead.

Introduced along with two other functions to enable MUD Game server log-in to be scripted with the simultaneous movement of that functionality from the Mudlet application core code to a predefined doLogin() function that may be replaced for more sophisticated requirements.

Note: Expected to be available from Mudlet 4.9

sendCharacterPassword

sendCharacterPassword()

Sends the password entered into the "Password" field on the Connection Preferences form directly to the MUD Game Server. Returns true unless there is nothing set in that entry or it is too long after (or before) a connection was successfully made in which case a nil and an error message will be returned instead.

Introduced along with two other functions to enable MUD Game server log-in to be scripted with the simultaneous movement of that functionality from the Mudlet application core code to a predefined doLogin() function, reproduced below, that may be replaced for more sophisticated requirements.

Note: Expected to be available from Mudlet 4.9

Example

-- The default function placed into LuaGlobal.lua to reproduce the previous behavior of the Mudlet application:
function doLogin()
  if getCharacterName() ~= "" then
    tempTime(2.0, [[sendCharacterName()]], 1)
    tempTime(3.0, [[sendCharacterPassword()]], 1)
  end
end

sendSocket

sendSocket(data)

Sends given binary data as-is to the MUD. You can use this to implement support for a new telnet protocol, simultronics login or etcetera.

Example

TN_IAC = 255
TN_WILL = 251
TN_DO = 253
TN_SB = 250
TN_SE = 240
TN_MSDP = 69

MSDP_VAL = 1
MSDP_VAR = 2

sendSocket( string.char( TN_IAC, TN_DO, TN_MSDP ) ) -- sends IAC DO MSDP

--sends: IAC  SB MSDP MSDP_VAR "LIST" MSDP_VAL "COMMANDS" IAC SE
local msg = string.char( TN_IAC, TN_SB, TN_MSDP, MSDP_VAR ) .. " LIST " ..string.char( MSDP_VAL ) .. " COMMANDS " .. string.char( TN_IAC, TN_SE )
sendSocket( msg )

Note: Remember that should it be necessary to send the byte value of 255 as a data byte and not as the Telnet IAC value it is required to repeat it for Telnet to ignore it and not treat it as the latter.

setMergeTables

setMergeTables(module): Makes Mudlet merge the table of the given GMCP or MSDP module instead of overwriting the data. This is useful if the game sends only partial updates which need combining for the full data. By default "Char.Status" is the only merged module.

Parameters

module:

Name of the GMCP or MSDP module that should be merged as a string.

Example

setMergeTables("Char.Skills", "Char.Vitals")

setModulePriority

setModulePriority(moduleName, priority)

Sets the module priority on a given module as a number - the module priority determines the order modules are loaded in, which can be helpful if you have ones dependent on each other. This can also be set from the module manager window.

setServerEncoding

setServerEncoding(encoding): Makes Mudlet use the specified encoding for communicating with the game.

Parameters

encoding:

Encoding to use.

Example

-- use UTF-8 if Mudlet knows it. Unfortunately there's no way to check if the game's server knows it too.
if table.contains(getServerEncodingsList(), "UTF-8") then
  setServerEncoding("UTF-8")
end

spawn

spawn(readFunction, processToSpawn[, ...arguments])

Spawns a process and opens a communicatable link with it - read function is the function you'd like to use for reading output from the process, and t is a table containing functions specific to this connection - send(data), true/false = isRunning(), and close().

This allows you to setup RPC communication with another process.

Examples

-- simple example on a program that quits right away, but prints whatever it gets using the 'display' function
local f = spawn(display, "ls")
display(f.isRunning())
f.close()

local f = spawn(display, "ls", "-la")
display(f.isRunning())
f.close()

startLogging

startLogging(state)

Control logging of the main console text as text or HTML (as specified by the "Save log files in HTML format instead of plain text" setting on the "General" tab of the "Profile preferences" or "Settings" dialog). Despite being called startLogging it can also stop the process and correctly close the file being created. The file will have an extension of type ".txt" or ".html" as appropriate and the name will be in the form of a date/time "yyyy-MM-dd#hh-mm-ss" using the time/date of when logging started. Note that this control parallels the corresponding icon in the "bottom buttons" for the profile and that button can also start and stop the same logging process and will reflect the state as well.

Parameters

state:

Required: logging state. Passed as a boolean

Returns (4 values)

successful (bool)

true if the logging state actually changed; if, for instance, logging was already active and true was supplied then no change in logging state actually occurred and nil will be returned (and logging will continue).

fileName (string)

The log will be/is being written to the path/file name returned.

message (string)

A displayable message given one of four messages depending on the current and previous logging states, this will include the file name except for the case when logging was not taking place and the supplied argument was also false.

code (number)

A value indicating the response to the system to this instruction:

 *  0 = logging has just stopped
 *  1 = logging has just started
 * -1 = logging was already in progress so no change in logging state
 * -2 = logging was already not in progress so no change in logging state

Example

-- start logging
startLogging(true)

-- stop logging
startLogging(false)

stopSounds

stopSounds()

Stops all currently playing sounds.

Note: Available in Mudlet 3.0.

timeframe

timeframe(vname, true_time, nil_time, ...)

A utility function that helps you change and track variable states without using a lot of tempTimers.

Note: Available in Mudlet 3.6+

Parameters

vname:

A string or function to use as the variable placeholder.

true_time:

Time before setting the variable to true. Can be a number or a table in the format: {time, value}

nil_time:

(optional) Number of seconds until vname is set back to nil. Leaving it undefined will leave it at whatever it was set to last. Can be a number of a table in the format: {time, value}

...:

(optional) Further list of times and values to set the variable to, in the following format: {time, value}

Example

-- sets the global 'limiter' variable to true immediately (see the 0) and back to nil in one second (that's the 1).
timeframe("limiter", 0, 1)

-- An angry variable 'giant' immediately set to "fee", followed every second after by "fi", "fo", and "fum" before being reset to nil at four seconds.
timeframe("giant", {0, "fee"}, 4, {1, "fi"}, {2, "fo"}, {3, "fum"})

-- sets the local 'width' variable to true immediately and back to nil in one second.
local width
timeframe(function(value) width = value end, 0, 1)

translateTable

translateTable(directions, [languagecode])

Given a table of directions (such as speedWalkDir), translates directions to another language for you. Right now, it can only translate it into the language of Mudlet's user interface - but let us know if you need more.

Note: Available in Mudlet 3.22+

Parameters

directions:

An indexed table of directions (eg. {"sw", "w", "nw", "s"}).

languagecode:

(optional) Language code (eg ru_RU or it_IT) - by default, mudlet.translations.interfacelanguage is used.

Example

-- get the path from room 2 to room 5 and translate directions
if getPath(2, 5) then
speedWalkDir = translateTable(speedWalkDir)
print("Translated directions:")
display(speedWalkDir)

uninstallModule

uninstallModule(name)

Uninstalls a Mudlet module with the given name.

Example

uninstallModule("myalias")

uninstallPackage

uninstallPackage(name)

Uninstalls a Mudlet package with the given name.

unzipAsync

unzipAsync(path, location)

Unzips the zip file at path, extracting the contents to the location provided. Returns true if it is able to start unzipping, or nil+message if it cannot

Raises the sysUnzipDone event with the zip file location and location unzipped to as arguments if unzipping is successful, and sysUnzipError with the same arguments if it is not.

Note: Available since Mudlet 4.6

Example

function handleUnzipEvents(event, ...)
  local args = {...}
  local zipName = args[1]
  local unzipLocation = args[2]
  if event == "sysUnzipDone" then
    cecho(string.format("<green>Unzip successful! Unzipped %s to %s\n", zipName, unzipLocation))
  elseif event == "sysUnzipError" then
    cecho(string.format("<firebrick>Unzip failed! Tried to unzip %s to %s\n", zipName, unzipLocation))
  end
end
if unzipSuccessHandler then killAnonymousEventHandler(unzipSuccessHandler) end
if unzipFailureHandler then killAnonymousEventHandler(unzipFailureHandler) end
unzipSuccessHandler = registerAnonymousEventHandler("sysUnzipDone", "handleUnzipEvents")
unzipFailureHandler = registerAnonymousEventHandler("sysUnzipError", "handleUnzipEvents")
--use the path to your zip file for this, not mine
local zipFileLocation = "/home/demonnic/Downloads/Junkyard_Orc.zip" 
--directory to unzip to, it does not need to exist but you do need to be able to create it
local unzipLocation = "/home/demonnic/Downloads/Junkyard_Orcs" 
unzipAsync(zipFileLocation, unzipLocation) -- this will work
unzipAsync(zipFileLocation .. "s", unzipLocation) --demonstrate error, will happen first because unzipping takes time

yajl.to_string

yajl.to_string(data)

Encodes a Lua table into JSON data and returns it as a string. This function is very efficient - if you need to encode into JSON, use this.

Example

-- on IRE MUDs, you can send a GMCP request to request the skills in a particular skillset. Here's an example:
sendGMCP("Char.Skills.Get "..yajl.to_string{group = "combat"})

-- you can also use it to convert a Lua table into a string, so you can, for example, store it as room's userdata
local toserialize = yajl.to_string(continents)
setRoomUserData(1, "areaContinents", toserialize)

yajl.to_value

yajl.to_value(data)

Decodes JSON data (as a string) into a Lua table. This function is very efficient - if you need to dencode into JSON, use this.

Example

-- given the serialization example above with yajl.to_string, you can deserialize room userdata back into a table
local tmp = getRoomUserData(1, "areaContinents")
if tmp == "" then return end

local continents = yajl.to_value(tmp)
display(continents)

@@ Line 524: / Line 524: @@
 ==loadWindowLayout==
-;loadWindowLayout
+;loadWindowLayout()
 :Resets the layout of userwindows (floating miniconsoles) to the last saved state.

Difference between revisions of "Manual:Miscellaneous Functions"

Revision as of 08:30, 1 December 2020

Miscellaneous Functions

addSupportedTelnetOption

alert

cfeedTriggers

closeMudlet

denyCurrentSend

dfeedTriggers

disableModuleSync

enableModuleSync

expandAlias

feedTriggers

getCharacterName

getModulePath

getModulePriority

getModuleSync

getMudletHomeDir

getMudletInfo

getMudletVersion

getOS

getProfileName

getCommandSeparator

getServerEncoding

getServerEncodingsList

getWindowsCodepage

hfeedTriggers

installModule

installPackage

killAnonymousEventHandler

loadWindowLayout

mudletOlderThan

openWebPage

playSoundFile

registerAnonymousEventHandler

reloadModule

resetProfile

saveProfile

saveWindowLayout

sendCharacterName

sendCharacterPassword

sendSocket

setMergeTables

setModulePriority

setServerEncoding

spawn

startLogging

stopSounds

timeframe

translateTable

uninstallModule

uninstallPackage

unzipAsync

yajl.to_string

yajl.to_value

Navigation menu

Search